-40%
Lot 40 Wrought Steel Washers, ¾ ID x 1-½ x .185" THICK, Industrial Surplus, Bolt
Lot 40 Wrought Steel Washers, ¾ ID x 1-½ x .185" THICK, Industrial Surplus, Bolt
Lot 40 Wrought Steel Washers, ¾ ID x 1-½ x .185" THICK, Industrial Surplus, Bolt
Lot 40 Wrought Steel Washers, ¾ ID x 1-½ x .185" THICK, Industrial Surplus, Bolt
Lot 40 Wrought Steel Washers, ¾ ID x 1-½ x .185" THICK, Industrial Surplus, Bolt
Lot 40 Wrought Steel Washers, ¾ ID x 1-½ x .185" THICK, Industrial Surplus, Bolt
Lot 40 Wrought Steel Washers, ¾ ID x 1-½ x .185" THICK, Industrial Surplus, Bolt
Lot 40 Wrought Steel Washers, ¾ ID x 1-½ x .185" THICK, Industrial Surplus, Bolt
Lot 40 Wrought Steel Washers, ¾ ID x 1-½ x .185" THICK, Industrial Surplus, Bolt
Lot 40 Wrought Steel Washers, ¾ ID x 1-½ x .185" THICK, Industrial Surplus, Bolt

Lot 40 Wrought Steel Washers, ¾ ID x 1-½ x .185" THICK, Industrial Surplus, Bolt

$ 7.92

  • Brand: Wrought Washer Manufacturing
  • Color: Silverish
  • MPN: REY2149501X
  • Material: Steel
  • Model: REY2149501-1000
  • Quantity: 40
  • Seller Notes: “Could be a fingerprint, freckle of oxidation, etc. on a few pieces.”
  • Size: 3/4 in.
  • Surface: Unplated
  • Thickness: .186" +/-
  • Type: Washer

Description

1646UC4D.2.57 THICK, Wrought Steel Flat Washers / Flatwashers, Part Number REY2149501X, or REY2149501-1000; Made in USA by Wrought Washer Manufacturing (TS-16949 and QS-9000 certified). Each bid quantity is for a Lot of Forty (40) Washers. You may bid / buy any number of lots, up to the total quantity available above. These were purchased at an industrial closeout sale earlier this year, and they were brand new in the original distributor's boxes. We rebagged them in heavy 4-mil Ziplok bags for resale, and so they would ship more economically. Sold in convenient lots of forty because that's how many would fit in the bags. These are nice heavy duty washers, with a weight of over 2-1/2 pounds per lot. Could be a fingerprint, freckle of oxidation, etc. on a few pieces. The diameters run very consistent, however, we have noticed some occasional variations in thickness. In our random sampling, the thinnest piece we found was .182," and the thickest was .200." The vast majority (90+%) seem to be about .185" (+/- .002). I couldn't get anyone here excited about sorting them, so we are selling them with the aforementioned disclaimer. Thus, you might have to buy more than one lot if you're needing forty pieces exactly the same thickness. The occasional variation in thicknesses could be very helpful if you're using them for shims or spacers. According to the calipers Outside diameter: 1.500" (1-1/2") Inside diameter: .780" (fits a 3/4" bolt) Thickness: .182" minimum / .200" maximum (we think) Material: Unplated Steel (attracts a magnet)